WC3 FT blue screen help

By imbectile ยท 4 replies
Oct 27, 2009
  1. I plyed game well, and them i was't at home for few days and when i came back, i started WC3FT and blue screen show up after 10sec and i tryed to reinstal game and system but its same again. Can some one tell me whats wrong?

    This is the error:
    BCCode : 100000d1 BCP1 : FF28E658 BCP2 : 00000002 BCP3 : 00000000
    BCP4 : BA2680A6 OSVer : 5_1_2600 SP : 3_0 Product : 256_1

    Comp config: ATI Radeon 9600se, 1,5gb ram memory, mainboard asus a7v8x-x
    Its and old mashine but WC3 should work fine...

  2. Route44

    Route44 TechSpot Ambassador Posts: 11,984   +72

    0xD1 errors are usually caused by faulty drivers. Are you getting Blue Screens only when playing games?
  3. imbectile

    imbectile TS Rookie Topic Starter

    Im getting blue screen in about 10 sec after starting game. i cant even start plying any map...
  4. imbectile

    imbectile TS Rookie Topic Starter

    But wheh i got this blue screen in WC3, after that i tryed to open AIMP and i got blue screen but that was only once, now im getting blue screen only in wc3
  5. Route44

    Route44 TechSpot Ambassador Posts: 11,984   +72

    Sounds like a video card driver issue. I suggest doing the following...

    1. Download Driver Cleaner Pro or Driver Sweeper (both have free versions) to your desktop screen and install.

    2. Download the latest driver(s) for your video card but don't install them.

    3. Uninstall your video card drivers and reboot your PC into Safe Mode. Run Driver Cleaner Pro or Driver Sweeper. If it doesn't find any video card drivers that is quite okay.

    4. Reboot and install new video card drivers.
Topic Status:
Not open for further replies.

Similar Topics

Add your comment to this article

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...