BSODs on Windows 7 - Need help

[drakeonfire]

Hello,

Recently I decided I was gonna buy Windows 7 Ultimate and at the same time get a new graphics (nvidia 260 gtx), new power supply (650W) and 2 extra gig's of RAM (same type as I already have etc)

But now everything is installed etc I am starting to get quite a few BSOD's .. and not just the same ones either. They seem to vary but I can't seem to get more than 1 hour (sometimes not even 30mins) before i get one!

Here are three of the report bits I managed to save:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: d1
BCP1: 0000000000000003
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF880048DE73D
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1



Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: a
BCP1: FFFFFA818009ABE8
BCP2: 000000000000000B
BCP3: 0000000000000000
BCP4: FFFFF800029457A8
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1





Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF880049CB136
BCP3: FFFFF88009952720
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1


Any ideas on what it could be?

Thanks.

Dave.

 

[drakeonfire]

another one to the list:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC000001D
BCP2: FFFFF88004987E0D
BCP3: 0000000000000000
BCP4: FFFFFA8007439900
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

 

[Route44]

Without minidumps it is difficult to say. However, with so many error codes it could be a sigtn of corrupted memory. So we suggest a good standard diagnostic proceedure of running Memtest on your RAM.

See the link below and follow the instructions. There is a newer version than what is listed but either one should work. If you need to see what the Memtest screen looks like go to reply #21. The third screen is the Memtest screen.

Let it run for a LONG time. The rule is a minimum of 7 Passes; the more Passes after 7 so much the better. There are 8 individual tests per Pass. Many people will start this test before going to bed and check it the next day.

If you have errors you have corrupted memory and it needs to be replaced.

Also, with errors you need to run this test per stick of RAM. Take out one and run the test. Then take that one out and put the other in and run the test. If you start getting errors before 7 Passes you know that stick is corrupted and you don’t need to run the test any further on that stick.


Link: https://www.techspot.com/vb/topic62524.html


* Get back to us with the results.

 

[drakeonfire]

Oh yeah Sorry i forgot about this, I fixed it ages ago..

The problem was both of my old RAM sticks were corrupted and the two new ones I had were fine.

So took both old ones out and left new ones in and no more BSOD's

Thanks anyway tho.

 

[Route44]

Good work on your part. Sorry for such a delay in answering.